Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP802 (C877VA-W modular AP) and multiple broadcast SSID's

Hi.

I now know that in order to have an ssid visible (broadcast) you need to set it as guest-mode in the dot11 config for the ssid. But how do i broadcast more than one ssid? When i try the AP disables the second and subsequent ssid and says only 1 ssid may be guest-mode...

H

Sent from Cisco Technical Support iPad App

1 ACCEPTED SOLUTION

Accepted Solutions

Re: AP802 (C877VA-W modular AP) and multiple broadcast SSID's

You need to add the commands

Dot11 mbssid globally. Then under the main radio interface mbssid.

Under the SSID mbssid guest-mode

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Re: AP802 (C877VA-W modular AP) and multiple broadcast SSID's

You need to add the commands

Dot11 mbssid globally. Then under the main radio interface mbssid.

Under the SSID mbssid guest-mode

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: AP802 (C877VA-W modular AP) and multiple broadcast SSID's

Thanks. I will try that tonite

Sent from Cisco Technical Support iPad App

478
Views
0
Helpful
2
Replies