Apple IOS 8 Support on Cisco Wireless Controller Catalyst 3850
With the recent introduction of IOS 8 for Apple devices, those devices which has been upgraded can't seem to connect to the WLC 3850. Further checking on the release notes I found out that the latest IOS version 3.6E ONLY supports till IOS 7. Does anyone here know about this? Or would I still need a TAC case raised.
Yes client is using 802.1X. When users connect to the SSID, it directs to landing page and when authenticated they get blank page hence can't browse. If they close browser and access web page then it connects fine.
Additionally, if they connect to any open based SSID without authentication, it works fine.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...