Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Assign WLAN to AP

Hi,

we have a Cisco WLC and created some WLANs. All is working fine. We have a H-REAP AP at a remote location. We don't want to assign all available WLANs to this AP. Is it possible to assign only special choosen WLANs to this AP?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Assign WLAN to AP

You can use the wlan override feature on the AP 802.11bgn and 802.11an under the wireless tab on the wlc. Check only the ssid's you wish to have on each radio.

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Re: Assign WLAN to AP

You can use the wlan override feature on the AP 802.11bgn and 802.11an under the wireless tab on the wlc. Check only the ssid's you wish to have on each radio.

-Scott
*** Please rate helpful posts ***
New Member

Re: Assign WLAN to AP

Thank you. That's what i`ve searched for.

H-REAP: 100 ms max latency between the WLC and AP may not exceed. Is it the same for local switching and local authentication?

Hall of Fame Super Silver

Re: Assign WLAN to AP

I would say yes, but again, that is considered best practice. Depending on the bandwidth at the time of authentication might be more of an issue. I have clients with h-reap ap's all over and no issue, but only few running over 100msec.

-Scott
*** Please rate helpful posts ***
208
Views
0
Helpful
3
Replies
CreatePlease login to create content