Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

association table missing information

My problem is that sometimes the assocation table does not fill in all information about other access points on the network. All the access points are on the same vlan. Most of the time it is the IP address of another access point that is missing. I set the time out for the assocation table for access points to 0 so it will contestnly track it but that did not help. Is there anything else I can do?

thanks for any help

1 REPLY
Anonymous
N/A

Re: association table missing information

I think there is a bug associated this. The bug ID is CSCin18914 and you can find this in Cisco's Bug toolkit.

Also, make sure that you have not turned on Publicly Secure Packet Forwarding (PSPF). But if PSPF is enabled, the issue will be permanent.

Since this occurs sometimes only, there are possibilities of something going wrong on the RF side.

You can also try upgrading to the 12.01T firmware if you are running some older version.

362
Views
0
Helpful
1
Replies
CreatePlease to create content