a). PC with WIN 2000 Adv Server and PCI350 client adapter can not associate with AP342. If I use AP350 the association is OK. The another PC with WIN 2000 Profesional can associate with both of them, AP342 and AP350.
b).WGB350 can not associate with AP342, but he associate with AP350. Are there compatible or not?
c).If I enable MIC on AP342 (MMH) , the clients associated with him but not communicate between itself (ping between clients not pass). If I disable MIC the ping pass. Why?
First thing you need to do is make sure all the wireless equipment has the latest firmware and drivers. The PCI 350 card should associate with an AP 342 or 350 with no problems. The WGB's are compatible with the AP's. Also check your configuration and if you still see some of those issues reset everything back to factory configuration and start over.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...