Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Authentication in Cisco 5508 Controller

Hello,

There is a Cisco 5508 Controller and my customer want to authenticate the users using a LDAP Server ( AD) , and the guest users must be provisioned by a LDAP user in web portal

is it possible?

 

Obs. There is no Cisco ISE.

 

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

It is possible, see document

It is possible, see document for LDAP authentication on a 4400:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108008-ldap-web-auth-wlc.html

You can also use the Windows RADIUS server NPS. It is easier and you can find more examples.

Gold

This section explains how to

This section explains how to configure a Lightweight Directory Access Protocol (LDAP) server as a backend database, similar to a RADIUS or local user database. An LDAP backend database allows the controller to query an LDAP server for the credentials (username and password) of a particular user. These credentials are then used to authenticate the user.

Refer the link :http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html

4 REPLIES
New Member

It is possible, see document

It is possible, see document for LDAP authentication on a 4400:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108008-ldap-web-auth-wlc.html

You can also use the Windows RADIUS server NPS. It is easier and you can find more examples.

Congratulations Ravi!Sadly I

.

Gold

This section explains how to

This section explains how to configure a Lightweight Directory Access Protocol (LDAP) server as a backend database, similar to a RADIUS or local user database. An LDAP backend database allows the controller to query an LDAP server for the credentials (username and password) of a particular user. These credentials are then used to authenticate the user.

Refer the link :http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html

Bronze

Please refer: www.cisco.com/c

Please refer: www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_user_accts.html#wp1120909

You can choose specific RADIUS or LDAP servers to provide external authentication on the WLANs > Edit (Security > AAA Servers) page. Additionally, you can define the priority in which the servers provide authentication.

Step 7 If you chose External as the web authentication type in Step 6, choose AAA Servers and choose up to three RADIUS and LDAP servers using the drop-down lists.


Note The RADIUS and LDAP external servers must already be configured in order to be selectable options on the WLANs > Edit (Security > AAA Servers) page. You can configure these servers on the RADIUS Authentication Servers page and LDAP Servers page.


 

80
Views
0
Helpful
4
Replies