Authentication with Multiple SSIDs AP521G, using Autonomous
I have an AP521G access point that I am trying to setup authentication for multiple SSIDs. One SSID is for domain users with WPA/TKIP authentication to a radius server and the other SSID is for guest to have access to Internet with no authentication. Is there a way to setup both SSIDs on the AP for this configuration?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...