Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Autonomous 1252 configuration examples

Does anyone have any 1252 autonomous configuration examples they would like to share?  I want to spend some time in the lab and convert some LWAPP 1252 to autonomous and play around with the 802.11n configurations.  I have configured hundreds of 1230s and 1240s in autonomous mode, but never any 1252s.  I'm specifically looking for 2x3 configs to test, etc.

Thanks in advance...

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Autonomous 1252 configuration examples

Hi,

There is no special config needed.. its just the same as the old APs.. if you want N-Speeds, then we need to enable WPA-2 with AES with all radios plugged in, this will do it.. Rest all config is the same..

Configuration attached!!

Lemme know how this answered your question.. Please rate the post if this was usefull..

Regards

Surendra

1 REPLY
Cisco Employee

Re: Autonomous 1252 configuration examples

Hi,

There is no special config needed.. its just the same as the old APs.. if you want N-Speeds, then we need to enable WPA-2 with AES with all radios plugged in, this will do it.. Rest all config is the same..

Configuration attached!!

Lemme know how this answered your question.. Please rate the post if this was usefull..

Regards

Surendra

2079
Views
0
Helpful
1
Replies
CreatePlease login to create content