Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Autonomous to LWAPP

Hi,

I have 5 ccess-point (AIR-AP1121G-A-K9) in automous mode (IOS), and now I will buy a controller.

Need I buy a new software (LWAPP) for APs? Or Can I change software free?

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: Autonomous to LWAPP

The software is free if you have access to the cisco site, or try your reseller.

The image is c1100-rcvk9w8-tar.123-11JX1

There is a upgrade tool that I would recommend using the LWAPP upgarde tool and make sure you save the SSC details as its an 1120?

The links below should help

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

1 REPLY
Community Member

Re: Autonomous to LWAPP

The software is free if you have access to the cisco site, or try your reseller.

The image is c1100-rcvk9w8-tar.123-11JX1

There is a upgrade tool that I would recommend using the LWAPP upgarde tool and make sure you save the SSC details as its an 1120?

The links below should help

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

210
Views
0
Helpful
1
Replies
CreatePlease to create content