Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Basic configuration for a WLAN Controller - 4400

I've been reading over the "Cisco Wireless LAN Controller Configuration Guide, Release 4.0".

So it looks like once you have the HTTPS enabled and the management IP set, the majority of the configuration is through the GUI - clicking your way through all the settings.

I've never used a wireless LAN controller -- so to make this quick and easy, is it possible to make a "quick and dirty cut and paste" CLI template to get it up and running with just minimal settings left to be done?

If so, could you post it? Thanks.

1 REPLY
Hall of Fame Super Silver

Re: Basic configuration for a WLAN Controller - 4400

Well, first you will have to console into the wlc and go through the startup wizard. that is your minimum configuration to get it working. No way around this unless you build a script to automatically enter information on the startup wizard.

-Scott
*** Please rate helpful posts ***
385
Views
0
Helpful
1
Replies