Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

BBSM IP PnP

Have been looking at BBSM 5.3 and can see that you can configure Foreign IP Address (which pickup static address in a range defined on Wireless Clients) but wonder if the BBSM can be configured for IP PnP whereby it will NAT the IP address of Wireless Client with a static address that attaches to it via a Cisco AP.

2 REPLIES
Silver

Re: BBSM IP PnP

A client configured with a fully qualified static IP address configuration: IP address,Subnet Mask, Gateway and DNS, would be adaptively NAT'd to an address in BBSM's foriegn range. The DNS entry can be omitted if the client is configured for web proxy.Refer http://cisco.com/en/US/products/sw/netmgtsw/ps533/products_tech_note09186a008009462b.shtml#topic2-2 for more information

New Member

Re: BBSM IP PnP

Thanks for the reply I thought the foreign address was how it was done but it wasn't initially working due to a config error.

151
Views
0
Helpful
2
Replies
CreatePlease to create content