01-21-2011 04:51 PM - edited 07-03-2021 07:42 PM
The ringed indicator light on the 1131 normally glows green. What is indicated when it is glowing blue instead? Is this a power issue?
Solved! Go to Solution.
07-08-2013 01:29 PM
So it looks like the radio is up... so are you able to connect?
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
07-08-2013 01:57 PM
I was able to connect but I had to type in the SSID of the AP on an employees laptop. I want the SSID to be broadcasted so that everyone can see it. I just assumed after you enabled the radio and put the settings in it would automatically broadcast.
07-09-2013 06:41 AM
After I had a client associate to the AP.....the SSID seems to be broadcasting all of a sudden. I'm worried what's going to happen when I change it to PoE. Thank you for your help.
07-09-2013 11:23 AM
Alright same person different name. I've been able to get the SSID broadcasting but it's also broadcasting "Other Network" even after turning some of the Guest SSID's on and off to see if anything made it go away. Nothing has worked.
07-09-2013 12:56 PM
Post an updated show run-config.
You sure your not seeing the SSID from another ap that might have it broadcasting.
Sent from Cisco Technical Support iPhone App
07-10-2013 07:03 AM
Yeah I'm sure. I deleted the SSID's and slowly started to narrow down what was causing the "Other Network" to pop up. Whenever I add an SSID it will be shown as "Other Network". There are other Cisco AP's in the company but they are all autonomous as well. Here you go. Currently I have it connected to the AC adapter not PoE. Thank you.
CardpackAP>en
Password:
CardpackAP#show run
CardpackAP#show running-config
Building configuration...
Current configuration : 1668 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname CardpackAP
!
enable secret 5 $1$Iqff$NwLuIeARC7kTVaXtlHVIB0
!
ip subnet-zero
ip domain name westernind.com
ip name-server 192.168.34.32
!
!
no aaa new-model
!
dot11 ssid WTCardPacAP
authentication open
!
dot11 arp-cache
power inline negotiation injector 000d.bddd.af03
power inline negotiation prestandard source
!
!
username Cisco privilege 15 password 7 072C285F4D06
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 128bit 7 325FBC3A76F96C750644B3A5B3B7 transmit-key
encryption mode wep mandatory
!
ssid WTCardPacAP
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
packet retries 50
station-role root
rts threshold 500
rts retries 50
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold-queue 160 in
!
interface BVI1
ip address 192.168.34.82 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.34.31
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
line vty 5 15
login
!
end
CardpackAP#
07-10-2013 09:47 AM
To broadcast the SSID
dot11 ssid WTCardPacAP
authentication open
guest-mode
Sent from Cisco Technical Support iPhone App
07-10-2013 11:42 AM
I did this and the WTCardpacAP finally showed up. However, the "Other Network" was still there. I went into the GUI and saw there were two SSID's with the same name. I deleted out the one that I just made through the CLI and it eliminated the "Other Network". Although it seems fixed for now I wish I knew what I was doing wrong. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide