09-19-2005 09:34 PM - edited 07-04-2021 11:08 AM
Hi every budy,
This is my first message in this forum,I hope you can help me to fix my BR problem.
my Aironet 1310 runing now with c1310-k9w7-tar.12.3(2)JA2 and it's restart by itself(for me no problem with restarting but the problem it's return to ROM so I lose all my configurations !) some time every 2 0r 3 days some time it can be up for a week, I heard that the new software version 12.3(7) is more stable but can't find it !! next is the begining of the Tect-Support file :
ROM: Bootstrap program is C1310 boot loader
BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA3, RELEASE SOFTWARE (fc2)
bridge uptime is 1 day, 1 hour, 55 minutes
System returned to ROM by unknown reload cause - reason ptr 0xF, PC 0x416EB4, address 0x0
System image file is "flash:/c1310-k9w7-mx./c1310-k9w7-mx."
I read next cisco help file but no solution the file name is (Cisco − Less Common Types of System Crashes).
My Regards
Saher
11-16-2005 07:13 AM
Hi,
Thank you andrew, I using ethernet interface, but tftp which I never try before even I read some instructions about downloading image file from TFTP server to AP but can't do it ! can you give me instructions how can I make it with TFTP or FTP server ?
Regards
s.abubasheer
11-16-2005 08:21 AM
Hi,
Setup a TFTP server on your PC (you can download a really nice one from here:
Very compact, does DHCP and other stuff as well. Get the TFTP server running and pointed at the directory where the image file is and make sure it's listening on the correct wired ethernet IP address of your PC (if you have multiple network cards).
From your web browser, ENABLE POPUPS!!! Very important or the upgrade won't work! Connect to the bridge, go to the System Software > Software Upgrade section. Click the TFTP Upgrade tab. Enter the IP address of your PC and the file name of the image file including the extention (no need to enter a path if you've set the TFTP server to point to the directory containing the image) and click the Upgrade button. You should see activity on the TFTP server as it uploads the image, it's a 2 step process. After the upgrade the bridge will reboot, when it comes back up check the firmware version, should be all done!
11-18-2005 02:01 PM
Hi,
thank you andrew, but still can't make it maybe something wrong with tftp server setting !please next my tftp server setting:
current directory :D:\Documents and Settings\Saher\Desktop\tftpd32.280
the image file(c1310-k9w7-tar.123-7.JA1) is in root of tftp directory
Server Interface: 192.168.20.99 subnet mask 255.255.255.0 (it's ip of my pc ethernet card)
BVI1 ip : 192.168.20.100 subnet mask 255.255.255.0
dot11radio interface0 no ip
ethernet interface no ip
am I right? is there a special setting for tftp server ? can you give me an example ? please
also I can use hyper terminal if you give me the right cli to use because I used next command but not worked ! ( archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name ).
Thank you in advance
s.abubasheer
12-24-2005 09:42 AM
Hi Mates,
Please, can use hyper terminal to upgrade my BR1310 firmware can you give me the right cli to use because I used next command but not worked ! ( archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name ).
Please read here product review from netprow team http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&type=PR&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9cdfd
I read there " Any specific caveats youd like to share about the product?
Some earlier versions of IOS software for the 1300s are affected by bugs, so I would advise to first read the release notes available at cisco.com ,before using those versions of software. One such caveat that I came across was for a client who had two 1300 bridges in a point-to-point configuration, the bridges lose connectivity after a power outage or when the bridges are rebooted. This was a bug in the IOS and causes a bridge parameter called CCA (Clear Channel Assessment) which gets set to zero after a reboot of the bridge. This bug has been fixed in IOS versions starting with 12.3.2JA and above."
this is very similar or exactly my problem but my br1310 is runing with 12.3(2)JA2 !!!
Thank you in advance
s.abubasheer
12-25-2005 09:37 AM
You could also use telnet to get access to the CLI.
(Windows: Start/Run, type cmd or command, telnet 192.168.20.100)
With the IP setup you posted above and assuming you
didn't rename the image you downloaded from cisco.com,
the following should work:
bridge# archive download-sw tftp://192.168.20.99/c1310-k9w7-tar.123-7.JA1.tar
You only need /overwrite if you want to download the same version again, Instead of /reload you can also
enter "reload" on the CLI after the download finished
successfully.
To test your tftp-setup try saving the config to the
tftp-server:
bridge# copy running-config tftp://192.168.20.99/
(Acknowledge IP and filename by hitting return)
There should be a file "running-config" on the
tftp-server in the same directory as the image now.
If this doesn't work, post the output from "show flash"
12-28-2005 12:30 PM
Hi,
Thank you kka next what did and I got :
bridge# copy running-config tftp://192.168.20.99/
Address or name of remote host [192.168.20.99]?
Destination filename [bridge-confg]?
.!!
2361 bytes copied in 8.173 secs (289 bytes/sec)
bridge# archive download-sw tftp://192.168.20.99/c1310-k9w7-tar.123-7.JA1.tar
examining image...
Loading c1310-k9w7-tar.123-7.JA1.tar from 192.168.20.99 (via BVI1): !
extracting info (274 bytes)
%Error opening flash:/update/info (No space left on device)
ERROR: Failed to open archive file tftp://192.168.20.99/c1310-k9w7-tar.123-7.JA1
.tar
bridge#
and here output of (show flash)
bridge# show flash
Directory of flash:/
2 -rwx 8567 Mar 1 2002 00:08:00 +00:00 crashinfo_20020301-000740
3 -rwx 402116 Aug 14 2005 22:40:32 +00:00 crashinfo_20050814-224027
4 drwx 256 Jan 1 1970 00:05:26 +00:00 c1310-k9w7-mx.
143 -rwx 70 Aug 11 2005 21:32:21 +00:00 env_vars
144 -rwx 409135 Aug 18 2005 23:10:51 +00:00 crashinfo_20050818-231041
145 -rwx 344927 Mar 1 2002 00:58:46 +00:00 crashinfo_20020301-005841
146 -rwx 426917 Aug 14 2005 14:04:07 +00:00 crashinfo_20050814-140401
147 -rwx 453893 Mar 1 2002 04:20:46 +00:00 crashinfo_20020301-042040
148 -rwx 412780 Mar 1 2002 02:39:32 +00:00 crashinfo_20020301-023925
149 -rwx 5 Mar 1 2002 00:26:56 +00:00 private-config
150 -rwx 402286 Mar 1 2002 08:58:27 +00:00 crashinfo_20020301-085820
151 -rwx 76 Mar 1 2002 00:26:59 +00:00 private-multiple-fs
152 -rwx 360092 Mar 1 2002 23:00:28 +00:00 crashinfo_20020301-225948
153 -rwx 386371 Mar 1 2002 17:56:48 +00:00 crashinfo_20020301-175456
154 -rwx 51626 Mar 1 2002 04:39:27 +00:00 crashinfo_20020301-043750
155 -rwx 1536 Mar 5 2002 04:29:44 +00:00 config.txt.new
156 -rwx 1661 Mar 1 2002 00:26:52 +00:00 config.txt
157 -rwx 0 Mar 5 2002 04:29:48 +00:00 private-multiple-fs.new
7741440 bytes total (0 bytes free)
bridge#
12-28-2005 03:15 PM
The flash file system is completely full from the
crash dumps. Remove those with the following CLI command:
bridge# delete /force flash:crashinfo*
(Confirm by hitting return)
Then try the update again.
12-28-2005 10:28 PM
Hi kka,
Thank you so so much, you and all guys try to help me, I pass this problem and update my br1310 successfuly
my best wishes for you and all other peopel with a happy new year .
Regards
s.abubasheer
12-30-2005 07:36 AM
Hi,
you need to free some space on the flash. I would recommend to delete all the "crashinfo_*" files. They are something like a core dump but not needed for normal operation. Be careful however not to delete the other files so far.
(delete flash:// crashinfo_20020301-225948 should do it. repeat for the other crash files).
In case you want to keep them you could still copy them to your TFTP server before.
Then perform a show flash again and check, wether there is enough space available for the new imae before downloading.
Hope this helps
Martin
12-31-2005 12:13 AM
Hi Martin,
Thank you for your care and more detailes you mention here. Happy new year.
Best Regards
Sahar
01-20-2006 01:14 AM
Hi,
After upgrading my br1310 it keeps restarting one or two times daily and does not save any new setting I did before !! can you help me what to do ?
Regards
s.abubasheer
01-20-2006 05:48 AM
Hi,
next is what I get when I try to save entries in the configuration file.
bridge>enable
bridge#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
nv_done: unable to open "flash:/config.txt.new"
nv_done: unable to open "flash:/config.txt.new"
nv_done: unable to open "flash:/private-multiple-fs.new"[OK]
bridge#
01-22-2006 11:12 PM
Most likely your flash file-system is full (again).
If you find a lot of crashinfo_* files in the output from "show flash:"
remove them with "delete /force flash:crashinfo*".
Then you should be able to save your config with "copy run start".
Every "crash" writes a file crashinfo_* after the reboot to flash:
Unless you can open a SR with the TAC they are useless.
You can disable the writing of the crashinfo files with the
following command:
no exception crashinfo
01-23-2006 10:21 AM
Hi,
Thank you kka, but what cause my br1310 to keep restarting 2 or 3 times a day ?! also with every reset I lose SNTP setting , see next please :
bridge uptime is 2 hours, 2 minutes
System returned to ROM by unknown reload cause - reason ptr 0xF, PC 0x6392F8, ad
dress 0x0
System image file is "flash:/c1310-k9w7-mx.123-7.JA2/c1310-k9w7-mx.123-7.JA2"
bridge uptime is 35 minutes
System returned to ROM by unknown reload cause - reason ptr 0xF, PC 0x6393B0, ad
dress 0x0
System image file is "flash:/c1310-k9w7-mx.123-7.JA2/c1310-k9w7-mx.123-7.JA2"
Regards
Saher
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: