Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

BR350 deployment

is this deployment possible [ root(yagi)---- non-root w/c #1(omni)----non-root w/c#2 (omni)].

1) all br350s are in a row

2) all br350s are same channel.

3) the distance between root and non-root is over 500m.

4) wireless lan client is only one user, and which user is moving around wireless lan zone. and there is no wired user.

is this deployment available? and is there any interruption between non-root#1 and non-root #2 ?

  • Getting Started with Wireless
1 REPLY
Cisco Employee

Re: BR350 deployment

Yes you can do this but a few comments.

If the non root#2 has a line of site it will associate to the root before it will associate to #1. If it associates to #1 then #1 will be a repeater and this will half the throughput as every packet it receives that is not desinted for itsself will be re transmitted on the radio link.

If there is NO wired clients at site 1 and 2 then your cheaper option would be just 3 AP's and let the wireless client roam between the 3 AP's as long as you can get ethernet connect to the nework for the AP's at all 3 sites

142
Views
0
Helpful
1
Replies
This widget could not be displayed.