Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

BR350 problem with MIC/TKIP

I have two BR350's that communicate with each other fine until I enable MIC/TKIP. 128-bit WEP encryption is set for Full Encryption. Once MIC is set to MMH and TKIP is set to Cisco, I loose connectivity between the two bridges. I have one bridge as the root-bridge, and the other bridge as client bridge w/o clients. I have restored the settings back to their original state, but they are still unable to communicate. The only way I can re-establish communication is to restore the Bridges back to factory default and setup with WEP. Any ideas on what I am missing here?

1 REPLY
Cisco Employee

Re: BR350 problem with MIC/TKIP

What version of firmware is on each bridge ?

130
Views
0
Helpful
1
Replies