Basicaly a Root Bridge (RB) is a wireless lan bridge that is connected to the network via ethernet cable to router or switch that also connects via wireless to a Non-Root Bridge (NRB) at a remote site. The NRB is connected to a switch with users connected to that switch. A workgroup bridge is basically a wireless hub that can connect up to eight wired users and send traffic wireless via an access point or a wireless lan bridge.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...