Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Broadcast Multiple SSID

Hi

I have a 1252 AP and i wanted to know what do i need to do to set it up to broadcast multiple SSID's

is there something that i need to do on the web interface or something through CLI.Thanks in advance

and have a great day.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Broadcast Multiple SSID

plz paste the output "show controllers". this will let us know whether we can or we cannot broadcast the multiple SSIDs.

The command to enable this featute is..

AP(config)#int dot11 0

AP(config-if)#mbssid

AP(config)#dot11 ssid

AP(config-ssid)#no guest-mode

AP(config-ssid)#mbssid guest-mode

AP(config)#dot11 ssid

AP(config-ssid)#no  guest-mode

AP(config-ssid)#mbssid guest-mode

This will do it

Regards

Surendra

1 REPLY
Cisco Employee

Re: Broadcast Multiple SSID

plz paste the output "show controllers". this will let us know whether we can or we cannot broadcast the multiple SSIDs.

The command to enable this featute is..

AP(config)#int dot11 0

AP(config-if)#mbssid

AP(config)#dot11 ssid

AP(config-ssid)#no guest-mode

AP(config-ssid)#mbssid guest-mode

AP(config)#dot11 ssid

AP(config-ssid)#no  guest-mode

AP(config-ssid)#mbssid guest-mode

This will do it

Regards

Surendra

2362
Views
0
Helpful
1
Replies
CreatePlease to create content