I would like to connect 2 switches through a wireless bridge on my VLAN network but vlan 1 which is the native vlan has no ip address asigned to it. A seperate vlan (vlan 2) is use to manage the switches. Both bridges will be connected to trunk ports. Documentation states the BVI is associated with the native vlan interface and must have an ip address in the same ip subnet assigned to vlan 1. Do I need to add an ip address to vlan 1 to meet this requirement?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...