Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

c1240 startup problem

Hi

I loaded a c1250 image on a c1240 ap by mistake.

Now it is hangs while booting .

I am not able to bring it to rommon.

any suggestion on how to fix this issue.

Regards,

SRanjeet

1 ACCEPTED SOLUTION

Accepted Solutions

Re: c1240 startup problem

Take a look at this document:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Re: c1240 startup problem

Take a look at this document:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: c1240 startup problem

Thanks a lot.

202
Views
0
Helpful
2
Replies
CreatePlease to create content