Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Can AIR-AP1242G-E-K9 Support wireless n with 4400 series controler?


Can AIR-AP1242G-E-K9 Support wireless n with 4400 series controler?

In my project of 60-100 LAP of 1242 series :



I am planning to use 4400 series wireless controller : AIR-WLC4404-100-K9(upto 100 LAP Support).


WCS-PLUS-100 ( Cisco WCS with PLUS License for 100 APs, Windows/Linux )


and One core layer 3 switch of 3750 series.


Also i shall be using 10 switches of WS-C2960-24LT-L or WS-C2960-24LC-S


The LAP will be AIR-LAP1242G-E-K9 with

TWO Antenas on each LAP .

Antenas will be AIR-ANT1728 ( 5.2 dBi Omni Ceiling Mount)


Question: 01. As per limited knowledge 1242 will NOT support wireless N protocol.


How can we make this system support for wireless N?


02. The 1242 device can have only two antenas......is it must to have three antenas in wireless n support?


please suggest in detail.....


Thanx alot in advance.


abdul

1 REPLY
Hall of Fame Super Gold

Re: Can AIR-AP1242G-E-K9 Support wireless n with 4400 series con

The only AP's in the 1200 series family of APs that supports 802.11n is the 1250.  In the 1100 series family of AP's it's the 1140.

Cisco Aironet 1250 Series Access Point Data Sheet
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html

Cisco Aironet 1140 Series Access Point Dat Sheet
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

FAQ:  Cisco Aironet 1140 Series and 1250 Series Access Point
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/prod_qas0900aecd806b7c82_ps10092_Products_Q_and_A_Item.html

875
Views
0
Helpful
1
Replies
CreatePlease to create content