can I install a lightweight access point using an LRE
I have an urgent need to install one access point in a building with no network infrastructure. There is a single copper pair hooked up to an old 575 LRE. It would be good if there could at least be a wep key for security, our standard is WPA2-enterprise.
I've been trying to get a 1252 autonomous access point set up but I'm having trouble getting internet connectivity. The client will associate to the AP but not get anywhere. And that's just in my lab, with a regular switch that is on the network.
Is it even possible to set up an autonomous AP through an LRE CPE? There's one ethernet port, and the LRE is sending vlan 84 from the core.
any help appreciated. bigwigs and VIP's are coming to visit our cold, dusty little town and they demand wifi!
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...