We have large area which need network connection. And the area can't have wire setup. So we are thinking about wireless solution. I know 1400 bridge can make a large wireless bridging network. We now have 1242 access point in that area. I'm thinking put another 3 or 4 1242 access point to make a bridging network. I used two 1242 to do that bridging but not sure I still can bridge them together if I have more than 2. Please advise. Thanks a lot.
By the way, I'm setting 1242 to tranmit max power right now. What's the maximum distance we can reach for 1242 801.11g? Thanks
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...