Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
I have downloaded a new IOS c1200-k9w7-mx.123-8.JA2 to the AP1231G. And it's failed to boot up. Now my AP is in boot loader mode.
ap: dir flash:
Directory of flash:/
2 drwx 64 <date> c1200-k9w7-mx.123-8.JA2
3 -rwx 282 <date> env_vars
153 -rwx 2072 <date> private-multiple-fs
4 -rwx 274 <date> info
152 -rwx 1915 <date> private-config
5 drwx 64 <date> c1200-k9w7-mx.123-8.JEE
6641664 bytes available (1099776 bytes used)
Loading "flash:/c1200-k9w7-mx.123-8.JA2/c1200-k9w7-mx.123-8.JA2"...flash:/c1200-k9w7-mx.123-8.JA2/c1200-k9w7-mx.123-8.JA2: no such file or directory
Error loading "flash:/c1200-k9w7-mx.123-8.JA2/c1200-k9w7-mx.123-8.JA2"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
Does any can help? Thanks
Take a look at this thread. It should help you fix it hopefully.
Sent from Cisco Technical Support iPhone App
Your solution is work. Thanks a lot.
Thanks. May I ask if you can mark this thread as "Answered" please?