Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Can we upgrade IOS in WLC 5508 through CISCO prime?

I have CISCO prime 2.0 and CISCO WLC 5508 HA SSO pair.

I would like to upgrade the software code for the WLC HA pair.

Can I do through the CISCO prime ......

As per the link :http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-43571

1. After the WLCs are configured in the HA setup, the Standby WLC cannot be upgraded directly from the TFTP/FTP server.

Prime do the upgrade through FTP server , so will it be ok if we do the upgrade through it, for HA WLC.

 

 

Everyone's tags (1)
2 REPLIES
VIP Purple

Please check this link to

Please check this link to upgrade wLC software in HA setup.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html

 

Once the Primary WLC complete the upgrade , it will transfer the entire image to the Standby WLC via the Redundant Port.

 

Regards

Dont forget to rate helpful posts

Bronze

Hi,Yes it will be fine if you

Hi,

Yes it will be fine if you do upgrade HA WLC through prime and Deployment guide which you are following that is providing accurate step by step procedure

1074
Views
0
Helpful
2
Replies