07-08-2014 02:35 AM - edited 07-05-2021 01:11 AM
I have CISCO prime 2.0 and CISCO WLC 5508 HA SSO pair.
I would like to upgrade the software code for the WLC HA pair.
Can I do through the CISCO prime ......
As per the link :http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-43571
1. After the WLCs are configured in the HA setup, the Standby WLC cannot be upgraded directly from the TFTP/FTP server.
Prime do the upgrade through FTP server , so will it be ok if we do the upgrade through it, for HA WLC.
07-08-2014 10:47 AM
Please check this link to upgrade wLC software in HA setup.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
Once the Primary WLC complete the upgrade , it will transfer the entire image to the Standby WLC via the Redundant Port.
Regards
Dont forget to rate helpful posts
07-16-2014 08:33 AM
Hi,
Yes it will be fine if you do upgrade HA WLC through prime and Deployment guide which you are following that is providing accurate step by step procedure
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: