Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot see other computer name (LWAPP)

We are using WLC4400(4.0.206) and LAP1130.

The network service is working well, but i cannot see other computer in the microsoft WinXP-SP2 network. They are same subnet.

I can search computer name in wired network but cannot see computer name in wireless lan(LWAPP)

I've enabled broadcast in WLC4400.(default value was disabled)

Is this LWAPP Turnnel problem?

2 REPLIES
Silver

Re: Cannot see other computer name (LWAPP)

Make sure the connectivity is fine by checking the ping command.If you are able to ping check if DNS is configured properly

using dns-server command.Refer URL for more info

http://cisco.com/en/US/products/hw/wireless/ps4570/products_installation_guide_chapter09186a0080797e0d.html#wp1007837

New Member

Re: Cannot see other computer name (LWAPP)

hi it is piece of cake.

netbios is blocked by default thats why you can't browse computers

to solve the issue, follow the following instruction

enable multicast on controler general configuration and also on every ports that connected to the LAN.

185
Views
0
Helpful
2
Replies
CreatePlease to create content