Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

(CAPWAP AP) Can I set IP Adress, Controller Address , ... via command line

I dont have DHCP server

I wan to configure CAPWAP AP manually?

how?

1 REPLY
Silver

(CAPWAP AP) Can I set IP Adress, Controller Address , ... via co

Hello,

yes you can.

1) issue command

debug lwapp console cli

2) clear lwapp private-config.

then use commands

lwapp ap ip address ip-addr subnet-mask

lwapp ap controller ip address ip-addr

lwapp ap hostname ap-hostname

lwapp ap ip default-gateway ip-addr

- if it gives you command disabled , please try the following:

show contents of flash

------------------------------------

show flash:

Directory of flash:/

     2  -rwx         201   Mar 1 2002 00:01:37 +00:00  env_vars

     3  -rwx       40521  Oct 23 2008 19:37:05 +00:00  event.log

    15  drwx         128   Mar 1 2002 00:03:08 +00:00  c1250-rcvk9w8-mx

     6  drwx         512   Nov 7 2008 20:36:53 +00:00

c1250-k9w7-mx.124-10b.JA

     4  -rwx        5144   Nov 5 2008 23:59:47 +00:00

private-multiple-fs

     4  -rwx        5144   Nov 5 2008 23:59:47 +00:00  private-config

we want to delete any image downloaded from the WLC and any files

starting with "private"

-----------------------------------------

delete /force /recursive flash:/c1250-k9w7-mx.124-10b.JA

delete /force flash:/private-config

delete /force flash:/private-multiple-fs

delete /force flash:/event.log

The only files left should be environment variables, and LWAPP recovery

image

------------------------------------------

show flash:

  2  -rwx         201   Mar 1 2002 00:01:37 +00:00  env_vars

  15  drwx         128   Mar 1 2002 00:03:08 +00:00  c1250-rcvk9w8-mx

Delete contents in nvram:

------------------------------------------

wr erase

Reboot AP and do not save configuration

------------------------------------------

reload

then use the previously mentioned commands.

Kind regards

Talal

===========

please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily

1377
Views
0
Helpful
1
Replies
CreatePlease login to create content