I'm setting up a catalyst 3750G with integrated WLC switch for a client. The swithing portion look good, but i'm facing problem with bringing up the WLC. Below is the information.
ap-manager LAG 1 172.16.1.252 Static
management LAG 1 172.16.1.253 Static
service-port N/A N/A 10.10.10.1 Static
virtual N/A N/A 126.96.36.199 Static
wlan_773 LAG 773 10.226.3.254 Dynamic
The problem that i'm facing now is i can't connect to the management interface from the network even i've configure an IP for that. As from the Cisco Doc, the LAG is the only option for this integrate WLC, i cannot disable it. The 3750G is the same management IP as the WLC management interface, which's 172.16.1.2/16
the management IP for WLC and 3750G are within the same VLAN and subnet, and both the devices trunking are connected, how come they can't reach each other?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...