i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered with the access points but as soon as the client device roams from one ap to another the netwotk connetivity is lost , a cisco documentation states to get the smartports configured as switches but that doesnt work at the same time bcos we have no encryption / authentication configured WDS doesnt come into picture , when i replace this ce 500 with a 2950 evrything seems to be perfect , please help because i have to deploy this network using a ce 500.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...