Central Flexconnect configuration

[gizbri]

I want to deploy APs in remote locations using FlexConnect. I will give the APs static IPs on the local LANS, but I want the clients to get DHCP from the existing WLAN back at the central site. Not sure what needs to be set on the WLAN for FlexConnect options. 

[Rasika Nayanajith]

Refer this design guide for FlexConnect

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch7_HREA.html

If you are using FlexConnect local switching, brach traffic will terminate at branch switch. So user SVI to be defined on branch switch, still you can point it to central DHCP server for IP allocation using "ip helper-address" under that SVI of the branch switch.

HTH

Rasika

**** Pls rate all useful responses ****