Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Certificate error - Webauth

Hi

Certificate error message popup when connecting to Guest Portal, I understand external CA needs to sign to overcome this error.

My question is what config is needed on the controller to correct it?

 

thanks

ST

1 ACCEPTED SOLUTION

Accepted Solutions

On the WLC, you need to

On the WLC, you need to install the certificate, and then under the vritual interface put in the name you used on the certificate:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.html

when you generate the CSR if you name the cert guest.mydomain.com then this is what you need to put under the virtual interface.

 

Lastly, you need to make sure that the DNS server you are giving the guests can resolve guest.mydomain.com to the IP address assigned to the virtua interface.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
6 REPLIES
VIP Purple

can you paste the screenshot

can you paste the screenshot ?? what is the eaxct eroor.

 

Regards

 

New Member

HiHow to generate CSR from

Hi

How to generate CSR from WLC?

thanks

ST

it's in my previous post, but

it's in my previous post, but here it is again

 

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.html 

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Thanks Steve, it works :-0can

Thanks Steve, it works :-0

can you help on my other discussion on ACL if possible

On the WLC, you need to

On the WLC, you need to install the certificate, and then under the vritual interface put in the name you used on the certificate:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.html

when you generate the CSR if you name the cert guest.mydomain.com then this is what you need to put under the virtual interface.

 

Lastly, you need to make sure that the DNS server you are giving the guests can resolve guest.mydomain.com to the IP address assigned to the virtua interface.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Gold

Please refer the following

88
Views
0
Helpful
6
Replies