Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

changes in secondary controller

Hi,

If two controllers are in ap sso high availability mode, how do we do changes in the secondary backup controller.

Consolling in to the secondary doesn't allow any changes. Is there any command from primary that is used to config or change parameters on the secondary controller.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: changes in secondary controller

Well you will have to disable AP SSO and make your changes and then enable AP SSO again.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Re: changes in secondary controller

They are sync'd and therefor you make changes only to the primary WLC that is active and the changes will be pushed to the HA WLC.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

changes in secondary controller

what if i want to change the hostname for controllers, that includes the secondary controller also.

thanks in advance.

Hall of Fame Super Silver

Re: changes in secondary controller

Well you will have to disable AP SSO and make your changes and then enable AP SSO again.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
125
Views
3
Helpful
3
Replies