Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco-1131 AG Mesh AP converts to LWAPP

hi,

is there a chance that Mesh APs will not associate with LWAPP imaged Controllers ? is it necessary that both AP and Controller shoud be mesh imaged ?

can we convert them Mesh APs to normal LWAPP mode ?

thanks,

Anvar

Everyone's tags (3)
3 REPLIES
New Member

Cisco-1131 AG Mesh AP converts to LWAPP

Translating "CISCO-LWAPP-CONTROLLER"...domain server (86.51.34.17) (86.51.35.18)

*Nov 22 19:38:05.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:06.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 
*Nov 22 19:38:07.681: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:07.682: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.10.11
*Nov 22 19:38:07.682: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 22 19:38:07.828: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Nov 22 19:38:07.830: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.0.10.11
*Nov 22 19:38:07.830: %DTLS-5-PEER_DISCONNECT: Peer 10.0.10.11 has closed connection.
*Nov 22 19:38:07.831: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.0.10.11:5246
*Nov 22 19:38:07.876: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 22 19:38:07.876: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 22 19:38:13.957:  status of voice_diag_test from WLC is false
AP44d3.cae5.7a20#
AP44d3.cae5.7a20#
*Nov 22 19:38:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

Hall of Fame Super Gold

Cisco-1131 AG Mesh AP converts to LWAPP

What firmware is your controller?

New Member

Cisco-1131 AG Mesh AP converts to LWAPP

1127
Views
0
Helpful
3
Replies
CreatePlease to create content