cisco 1262 AP

[HUGH LANCASTER]

I have a cisco 1262n if rebooted will display a hazel light but once a device is connect, does not display any type of light. Access Point is working jut like seeing my blue light once a device is connected. .... Thanks

[Rasika Nayanajith · Accepted solution]

As long as AP is working you should be fine (no visual indication though), As per the documents 1262 should have blue LED when client associated.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1260/quick/guide/ap1260getstart.html#wp46485

They mentioned below regarding LED status colours as well in the document as a note.

"Regarding LED status colors, it is expected that there will be small variations in color intensity and hue from unit to unit. This is within the normal range of the LED manufacturer's specifications and is not a defect."

In certain other AP models (like 1600 series )  you do not get this blue LED indicator at all.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1600/quick/guide/ap1600getstart.html#wp61478

HTH

Rasika

*** Pls rate all useful responses ***

[HUGH LANCASTER]

Thanks for the reply. All is working just miss my blue light. If I reboot, I see a hazel while boot but once startup completes no light. No biggie. Thought maybe a setting somewhere may correct this.