Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment resetting to default after rebooting

Hi,

I have noticed when I was staging/priming the Cisco 1522, in the 802.11 b/g/n radio configuration, after setting the RF channel and TC power level to global and the Cisco 1522 reboots, the RF channel and TC power level reverts back to the default values (RF Channel - 13 and TX Power Level - 1).  The code of the WLC is 7.0.98.  Has anyone of you encountered this kind of problem?

Regards,

Manuelito

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

Hi,

Looks like similar issue pointed in this bug..

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj82323

Please upgrade the code to 7.0.230 or 7.0.220 and see if you are able to reproduce the same..

Please dont forget to rate the usefull posts!!

Regards

Surendra

3 REPLIES
Cisco Employee

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

Hi,

Looks like similar issue pointed in this bug..

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj82323

Please upgrade the code to 7.0.230 or 7.0.220 and see if you are able to reproduce the same..

Please dont forget to rate the usefull posts!!

Regards

Surendra

New Member

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

thanks a lot.  upgraded WLC to 7.0.230 and problem rectified.

Cisco Employee

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

Awesome!!

593
Views
0
Helpful
3
Replies