How to configure VPN Passthrough on Cisco 2500 series WLC?
I have configure two WLANs, WLAN1: for Internet Access Only and WLAN2: for Intranet & Internet Access. I can access all resources from WLAN2, but not able to do VPN using UDP. However, if I use TCP everything works fine with VPN.
If I use Wired connection, then I can VPN using TCP & UDP without any issues. Am I missing something on the WLC Configuration for VPN?
FYI, I have WLC 2504 running on code 126.96.36.199. I tried using windows with Cisco VPN Client and MAC book
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...