Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2504 Dashboard - Top Operating Systems is empty

I'm trying to get the client operating system detection working.  I've enabled AVC for the WLAN's, and the dashboard displays and detects applications fine, but not client OS.  I can't find any setting to enable this feature. 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi Under WLAN advanced

Hi 

Under WLAN advanced settings you should have DHCP/HTTP profiling for Local & RADIUS client that you should enable to get this information.

You may need to have one of latest (7.4.x/7.6.x/8.0.x) WLC code to have this feature.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01100100.html

HTH

Rasika

**** Pls rate all useful responses ****

1 REPLY
VIP Purple

Hi Under WLAN advanced

Hi 

Under WLAN advanced settings you should have DHCP/HTTP profiling for Local & RADIUS client that you should enable to get this information.

You may need to have one of latest (7.4.x/7.6.x/8.0.x) WLC code to have this feature.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01100100.html

HTH

Rasika

**** Pls rate all useful responses ****

1490
Views
10
Helpful
1
Replies