Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2504 Etherchannel configuration

Hi,

I have a cisco 2960 switch and 2504 WLC so i want to make a etherchannel bundle between these switch and controller.

I read some documents regarding this scenario but there was different informations; some of them had been told it is possible and some of them had been told it is impossible with 2504 series.

Is it possible to make a etherchannel?

If it is possible how can i do that?

my WLC image is 7.3

Thanks,

Charith

5 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Cisco 2504 Etherchannel configuration

Indeed. 7.4 supports it .. Here is the release notes
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/product_bulletin_c25-722724.html


Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

Upgrade to 7.4. Under controller tab select LAG. On the switch side build an etherchannel .. Follow the config guide best practices .. Look up lag in 7.4 config guide

Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

It can be confusing ..

7.2, 7.3 and 7.4 are different trains .. One has more features than the last .. Cisco will release maintenace updates for each train ..

Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

sorry my mobile got cut off .. So the latest train and the train that supports LAG is 7.4. So whatever the hightest number is in the 7.4 folder is the lastest ..

make sense?

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Silver

Re: Cisco 2504 Etherchannel configuration

Haha... Its George's iOS 7:)

So the first version to support LAG was v7.4.100.0 and the other image available is the v7.4.100.60 which is the latest but is beta. So either one of the v7.4 will work.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
12 REPLIES

Re: Cisco 2504 Etherchannel configuration

Indeed. 7.4 supports it .. Here is the release notes
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/product_bulletin_c25-722724.html


Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

Upgrade to 7.4. Under controller tab select LAG. On the switch side build an etherchannel .. Follow the config guide best practices .. Look up lag in 7.4 config guide

Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

Thanks for supporting the rating system. Stop back if you have any questions or issues when you do the LAG config.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

Re: Cisco 2504 Etherchannel configuration

Thank you George for your quick and correct reply. 

New Member

Re: Cisco 2504 Etherchannel configuration

George,

I am confusing with WLC software download.

because the lateset release is 7.2.115.2

7.4.100.60  have been released prior to the 7.2.115.2.

what is the latest one?

why old 7.2 versions are releasing yet ?

Thanks,

Charith

Re: Cisco 2504 Etherchannel configuration

It can be confusing ..

7.2, 7.3 and 7.4 are different trains .. One has more features than the last .. Cisco will release maintenace updates for each train ..

Sent from Cisco Technical Support iPhone App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: Cisco 2504 Etherchannel configuration

sorry my mobile got cut off .. So the latest train and the train that supports LAG is 7.4. So whatever the hightest number is in the 7.4 folder is the lastest ..

make sense?

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

Re: Cisco 2504 Etherchannel configuration

ok. but why dose it conduct different trains? like 7.2, 7.3 and 7.4

what is the reason?

Hall of Fame Super Silver

Re: Cisco 2504 Etherchannel configuration

Features! Various trains are developed for specific WLC models, access points and features. The release notes will explain what devices are supported and what are the new features.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: Cisco 2504 Etherchannel configuration

Cisco released a number of different trains. The difference between them is features. The 7.2 has been out longer than 7.3 and 7.4. Folks that dont want to be bleeding edge tend to stick with older releases. For example, Im still on 7.0 myself for most of my gear ..

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Silver

Re: Cisco 2504 Etherchannel configuration

Haha... Its George's iOS 7:)

So the first version to support LAG was v7.4.100.0 and the other image available is the v7.4.100.60 which is the latest but is beta. So either one of the v7.4 will work.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: Cisco 2504 Etherchannel configuration

Hello Charith,

As per your query i can suggest you the following solution-

WLC 7.4 version supports it.

Hope this will help you.

659
Views
0
Helpful
12
Replies
CreatePlease login to create content