Hi, Im trying to migrate from old Symbol Wireless kit. I have had a survey done and changed the antenna on the current kit in preparation of the change. They are Dual channel planar. They only have two connections as at the time we were planning on buying 1261N but obviously end of life by the time we came to do the work. We ended up getting 2602 but as we understand we ideally need to use all four connections? Is this the case or can I disable connection C and D and be good to go? Any help greatly received. Ta
There are settings on both autonomous and lightweight to configure what antenna port you will use. So yes, you can disable C & D if you want. My preference is to purchase new antennas especially made for the access points you choose. All I can say is to test it out with the existing antennas if that is what your plan is.
Help out other by using the rating system and marking answered questions as "Answered"
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...