Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2602I-E-K9, console not working

Hi,

I have one Cisco SAP2602I-E-K9 access point to be irnstalled without any wireless controller. I have received the good part  from distributor and facing problems in accessing the device via console as its not connecting with COM1 and giving me errors unable to connect.

Also I was unable to access it through any URL like http://192.168.1.1

let me know how can i access the it using console / other options.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Cisco 2602I-E-K9, console not working

Well are you sure it's COM1? Look at the Windows device manager and see what port the USB to serial adapter is using. Also make sure your device is set to the following:

Baud rate: 9600
Flow control: None
Data bits: 8
Parity: None
Stop bits: 1

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

Re: Cisco 2602I-E-K9, console not working

Well are you sure it's COM1? Look at the Windows device manager and see what port the USB to serial adapter is using. Also make sure your device is set to the following:

Baud rate: 9600
Flow control: None
Data bits: 8
Parity: None
Stop bits: 1

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
484
Views
0
Helpful
1
Replies
CreatePlease to create content