Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. And see here for current known issues.
We plan on buying a Cisco 2700 wireless location appliance but I need to know if it will be compatible with our 2500 WLC.
I've tried to look but cant find any document for this. Also can you deploy the location appliance without a WCS?
Here is the matrix. You will need to lookat the code you are running in the WLC.The 2700 is also EOS.http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.htmlSent from Cisco Technical Support iPhone App
Here is the direct linkhttp://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp106063Sent from Cisco Technical Support iPhone App
So it's by software version on the WLC and not the hardware?
Yes... So the last supported WLC code for the 2700 is 18.104.22.168 and the 2504 required 7.x or newer. So that will not work.Sent from Cisco Technical Support iPhone App
So the 2710 is the replacement for the 2700. So if you have a controller on 7.0 that means you can use the location appliance. Are there anyother work arounds to get location services working?
You need the MSE not the 2710.Sent from Cisco Technical Support iPhone App
Here is the product guidehttp://www.cisco.com/en/US/products/ps9742/index.htmlSent from Cisco Technical Support iPhone App