I have a Cisco 350 Wireless bridge (root bridge) with a Breezecom WBC-DS11 bridge (non-root). The two bridges associate, but they won't pass data between them. The only thing that I can see wrong right now is that the Breezecom radio appears as a
"client" on the association table. Should it appear as a bridge instead of a client? Has anyone made this combination of equipment work?
Re: Cisco 350 Wireless Bridges with BreezeCom bridges
Looking on the www.wi-fi.org website I do not see the Breezecom bridge on the WI-FI compliant list. If the device is not WI-FI compliant, then that could be the reason that no traffic is passing. You could try to upgrade the firmware on both devices to see if that fixes the issue.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...