Cisco 526 Wireless express controller and Guest setup
We are going to implement a small (2-3 APs) wireless network and we wanted gust to have access too. My question is how do we implemetn the guest setup and separate that accessf rom our network. How does the 526 do it. Do we need a separate internet access for guest. Do we need separate vlan? Is it easy to setup using the 526?
Re: Cisco 526 Wireless express controller and Guest setup
Thanks for the reply. I did see this before I just cannot understand how creating the guest vlan will segragate the guest connection from our network. I just need more explanation on how the guest connection would not be able to access our data network.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...