I have this 871 router that I am configuring for VPN access and Wireless access. The VPN part is already done and works fine; however, the wireless part is giving me some headhache.
First I cannot have access to the web interface even I set an IP address to bvi1. When I issue a show ip int brief, the output shows that the dot1radio 0 is up/up, but the virtual dot1radio is down/down. As I am a wireless guru, I don't really know what may explain this.
Any ideas Pros? I really need help with that. Once again, the ssid is set via the cli. Show ip int brief shows that the dot1Radio0 interface and bvi1 are up/up, but the unit does not broadcast the ssid. I cannot get to the browser, usually I use the brower to set up the cisco wireless devices.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...