Cisco 887VAMG2

[alkabeer80]

Hi, I have cisco 800 series router with one port for ADSL/VDSL, 4 port switch, 1 slot for sim1 and sim2, and two antenns.

I want to know why i have these antenns, i have check the interfaces and there is no BVI interface.

Router#show inventory
NAME: "887VAMG2", DESCR: "887VAMG2 chassis, PID: C887VAMG+7-K9 

NAME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless Mini Card HSPA+R7 modem" PID: 8705

Router#sh ip interface brief

Interface                  IP-Address      OK? Method Status                Protocol

ATM0                       unassigned      YES unset  down                  down   

Cellular0                  unassigned      YES unset  down                  down   

Ethernet0                  unassigned      YES unset  administratively down down   

FastEthernet0              unassigned      YES unset  down                  down   

FastEthernet1              unassigned      YES unset  down                  down   

FastEthernet2              unassigned      YES unset  down                  down   

FastEthernet3              unassigned      YES unset  down                  down   

Vlan1                      unassigned      YES unset  down                  down

Can i configure wireless on these router so that i can broadcast SSID ?

Thanks

[Eduardo Aliaga · Accepted solution]

You need interfaces called "radios" to use wifi and enable SSIDs. It seems you dont have those interfaces.

Please rate if it helps. Kind regards