Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Controller

Dear All,

i have one wireless controler Cisco AIR-WLC4402-50-K9 and we have problem with Power supply. this controller connected with 43 AP's (AIR-LAP1131AG-E-K9), when we replaced with another WLC controller with same model no but all the AP's showing there and the status is downloading. i have waited more than 4 hrs but still showing dowload status. can any one help me to configure new WLC controller with our existing AP's.

AP Error.jpg

regards,

Fairose

Everyone's tags (1)
15 REPLIES
VIP Purple

Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Controll

First of all as per your pics:

Operation status of your AP is down and its connected tp AP and also got ip via DHCP.

Fisr of all Paste the info-:

From WLC: sh sysinfo

From AP: sh version

Regards

New Member

Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Controll

Dear Sandeep,

Please find the details and give us the hope dear.

Controller:


Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.3
RTOS Version..................................... 7.0.235.3
Bootloader Version............................... 7.0.235.3
Emergency Image Version.......................... 6.0.199.4
Build Type....................................... DATA + WPS

System Name...................................... Cisco_34:a3:e3
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 192.168.26.3
System Up Time................................... 0 days 0 hrs 36 mins 59 secs
System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi

Configured Country............................... AE  - United Arab Emirates
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +35 C


--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 3
Number of Active Clients......................... 0

Burned-in MAC Address............................ D0:D0:FD:35:D9:E0
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 50

AP

ASMUSVIP01#sh ver
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:58 by prod_rel_team

ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)

ASMUSVIP01 uptime is 3 hours, 4 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w8-mx.124-23c.JA2/c1130-k9w8-mx.124-23c.JA2"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
Processor board ID FCZ1028Q0HY
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.116.0
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:18:73:40:07:E2
Part Number                          : 73-8962-09
PCA Assembly Number                  : 800-24818-08
PCA Revision Number                  : A0
PCB Serial Number                    : FOC10252XNS
Top Assembly Part Number             : 800-25544-06
Top Assembly Serial Number           : FCZ1028Q0HY
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9

Configuration register is 0xF

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

Hi,

And I guess your AP is connected with WLC ?

1. What I can see from picture is AP operation status is down ?

2. Are you using Power Injector for APs ?

3. Did you have connection problem or ?

If AP is not connecting then paste the complete bootprocess here from AP console.

Regards

New Member

Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Controll

Dear we connect with POE switch and i can able see there in the Controller. but it is not stable it is restarting continuously.

*Mar  1 00:00:11.671: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar  1 00:00:11.904: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar  1 00:00:11.905: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:00:11.905: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar  1 00:00:12.153: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r                                                                                eset
*Mar  1 00:00:12.153: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r                                                                                eset
*Mar  1 00:00:12.528: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern                                                                                et0, changed state to up
*Mar  1 00:00:12.905: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio                                                                                0, changed state to down
*Mar  1 00:00:12.905: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio                                                                                1, changed state to down
*Mar  1 00:00:22.029: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D                                                                                HCP address 192.168.106.72, mask 255.255.255.0, hostname ASMUSVIP01

*Mar  1 00:00:30.963: Logging LWAPP message to 255.255.255.255.

*Mar  1 00:00:34.682: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power s                                                                                ource
*Mar  1 00:00:34.722: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar  1 00:00:34.760: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:00:35.682: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio                                                                                1, changed state to up
*Mar  1 00:00:35.683: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.                                                                                255 started - CLI initiated
*Mar  1 00:00:35.722: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio                                                                                0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar  1 00:00:41.529: %CAPWAP-3-ERRORLOG: Did not get log server settings from D                                                                                HCP.

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
*Mar  1 00:00:50.530: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL                                                                                LER

*Mar  1 00:00:59.531: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL                                                                                ER
*Mar  1 00:01:09.533: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 20 14:19:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i                                                                                p: 192.168.26.2 peer_port: 5246
*Feb 20 14:19:42.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
examining image...
extracting info (295 bytes)
Image info:
    Version Suffix: k9w8-.124-21a.JHB1
    Image Name: c1130-k9w8-mx.124-21a.JHB1
    Version Directory: c1130-k9w8-mx.124-21a.JHB1
    Ios Image Size: 4823552
    Total Image Size: 4987392
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: C1130
    Wireless Switch Management Version: 6.0.199.4
Extracting files...
c1130-k9w8-mx.124-21a.JHB1/ (directory) 0 (bytes)
c1130-k9w8-mx.124-21a.JHB1/html/ (directory) 0 (bytes)
c1130-k9w8-mx.124-21a.JHB1/html/level/ (directory) 0 (bytes)
c1130-k9w8-mx.124-21a.JHB1/html/level/1/ (directory) 0 (bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/appsui.js (557 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/back.shtml (506 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/forms.js (17486 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/sitewide.js (16548 bytes)
*Feb 20 14:19:43.398: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully                                                                                 peer_ip: 192.168.26.2 peer_port: 5246
*Feb 20 14:19:43.399: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.26.2
*Feb 20 14:19:43.399: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform arc                                                                                hive download c
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/config.js (24933 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/officeExtendap.css (41795 byt                                                                                es)apwap:/c1130 tar file
*Feb 20 14:19:43.417: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/ap_home.shtml.gz (1296 bytes)
c1130-k9w8-mx.124-21a.JHB1/html/level/1/images/ (directory) 0 (bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/images/background_web41.jpg (                                                                                732 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/images/cisco-logo-2007.gif (1                                                                                648 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/images/info.gif (399 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/1/images/login_homeap.gif (1967                                                                                1 bytes)
c1130-k9w8-mx.124-21a.JHB1/html/level/15/ (directory) 0 (bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapBanner.htm (71                                                                                08 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapConfig.shtml.g                                                                                z (2859 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapEvent.shtml.gz                                                                                 (983 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapHelp.htm (5007                                                                                 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapMain.shtml.gz                                                                                 (3304 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/html/level/15/officeExtendapSummary.htm (7                                                                                12 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/c1130-k9w8-mx.124-21a.JHB1 (4552433 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/7101.img (131328 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/6701.img (131328 bytes)
extracting c1130-k9w8-mx.124-21a.JHB1/info (295 bytes)
extracting info.ver (295 bytes)
Deleting target version: flash:/c1130-k9w8-mx.124-21a.JHB1...done.
New software image installed in flash:/c1130-k9w8-mx.124-21a.JHB1
Configuring system to use new image...done.
archive download: takes 83 seconds

Writing out the event log to nvram...

*Feb 20 14:21:06.427: %DTLS-5-ALERT: Received WARNING : Close notify alert from                                                                                 192.168.26.2
*Feb 20 14:21:06.427: %DTLS-5-PEER_DISCONNECT: Peer 192.168.26.2 has closed conn                                                                                ection.
*Feb 20 14:21:06.427: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 1                                                                                92.168.26.2:5246
*Feb 20 14:21:07.118: image upgrade successfully, system is now reloading
*Feb 20 14:21:07.198: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Feb 20 14:21:07.199: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Feb 20 14:21:07.228: %SYS-5-RELOAD: Reload requested by capwap image download p                                                                                roc. Reload Reason: NEW IMAGE DOWNLOAD.
*Feb 20 14:21:07.231: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
*Feb 20 14:21:07.326: %CAPWAP-3-ERRORLOG: Discovery Reply: received Discovery Re                                                                                ply but AP op state 1; HA timing flag 0
*Feb 20 14:21:07.326: %CAPWAP-3-ERRORLOG: Discovery Reply: received Discovery Re                                                                                ply but AP op state 1; HA timing flag 0Xmodem file system is available.
flashfs[0]: 27 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6932992
flashfs[0]: Bytes available: 9065984
flashfs[0]: flashfs fsck took 29 seconds.
Base ethernet MAC Address: 00:18:73:40:07:e2
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-k9w8-mx.124-21a.JHB1/c1130-k9w8-mx.124-21a.JHB1"...#######                                                                                ################################################################################                                                                                ################################################################################                                                                                ################################################################################                                                                                ################################################################################                                                                                ################################################################################                                                                                #############################################

File "flash:/c1130-k9w8-mx.124-21a.JHB1/c1130-k9w8-mx.124-21a.JHB1" uncompressed                                                                                 and installed, entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JHB1, RELEAS                                                                                E SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 11-Aug-10 15:39 by prod_rel_team


Proceeding with system init

Proceeding to unmask interrupts
Initializing flashfs...

flashfs[1]: 27 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15482880
flashfs[1]: Bytes used: 6932992
flashfs[1]: Bytes available: 8549888
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

Radio0  present A506 7100 E8000000 A0000000 80000000 3
Radio1  present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/81                                                                                92K bytes of memory.
Processor board ID FCZ1028Q0HY
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 6.0.199.4
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:18:73:40:07:E2
Part Number                          : 73-8962-09
PCA Assembly Number                  : 800-24818-08
PCA Revision Number                  : A0
PCB Serial Number                    : FOC10252XNS
Top Assembly Part Number             : 800-25544-06
Top Assembly Serial Number           : FCZ1028Q0HY
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
% Please define a domain-name first.


Press RETURN to get started!


*Mar  1 00:00:06.089: soap_prepare_new_image_crash: mini ios flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx
*Mar  1 00:00:06.091:  set boothlpr to mini ios
*Mar  1 00:00:06.440: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:07.857: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:09.250: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar  1 00:00:09.362: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)

*Mar  1 00:00:11.497: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar  1 00:00:11.568: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 11-Aug-10 15:39 by prod_rel_team
*Mar  1 00:00:11.568: %SNMP-5-COLDSTART: SNMP agent on host ASMUSVIP01 is undergoing a cold start
*Mar  1 00:00:11.649: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar  1 00:00:11.883: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar  1 00:00:11.883: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:00:11.883: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar  1 00:00:12.131: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar  1 00:00:12.131: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:00:12.498: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:12.888: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:00:12.889: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar  1 00:00:24.006: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.106.76, mask 255.255.255.0, hostname ASMUSVIP01

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

HI fairose,

export@cisco.com.

cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/81                                                                                92K bytes of memory.
Processor board ID FCZ1028Q0HY
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 6.0.199.4
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:18:73:40:07:E2
Part Number                          : 73-8962-09
PCA Assembly Number                  : 800-24818-08
PCA Revision Number                  : A0
PCB Serial Number                    : FOC10252XNS
Top Assembly Part Number             : 800-25544-06
Top Assembly Serial Number           : FCZ1028Q0HY
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
% Please define a domain-name first.

     This -E- domain is ued for europian  countries.

And your WLC shows that you are in United Arab Emirate whcih I think normally use -C- domain for these kind of APs.

Regards

Dont forget to rate helpful posts 

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

New Member

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

so which county we can select? UK is ok?

New Member

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

Still AP is doing same, Still status is DOwloading dear.

AP.JPG

Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Wed 11-Aug-10 15:39 by prod_rel_team

*Mar  1 00:00:11.590: %SNMP-5-COLDSTART: SNMP agent on host ASMUSVIP01 is undergoing a cold start

*Mar  1 00:00:11.672: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Mar  1 00:00:11.905: %SSH-5-ENABLED: SSH 2.0 has been enabled

*Mar  1 00:00:11.905: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar  1 00:00:11.905: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar  1 00:00:12.154: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Mar  1 00:00:12.154: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Mar  1 00:00:12.524: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up

*Mar  1 00:00:12.913: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Mar  1 00:00:12.913: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

*Mar  1 00:00:22.029: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.106.143, mask 255.255.255.0, hostname ASMUSVIP01

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

Make AP factory reset and then try again.

Regards

Sent from Cisco Technical Support iPhone App

New Member

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

Dear Sandeep,

we done factory reset, but still again same process started to downloading again,

this is New IOS dowloading from controler, is this will support for our WLC4402.

c1130-k9w8-mx.124-21a.JHB1/c1130-k9w8-mx.124-21a.JHB1"

Kindly advice us for quick solution.

New Member

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

Our Controller emergency image version is 6.0.199.4 and our old controller which is faulty one is having 7.0.x. will this may create a problem??

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

1131AG AP support both version (6.0.199.0 and 7.0) its not a problem.

Regards

VIP Purple

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

If you still facing problem then check your PM.

Regards

New Member

Re: Cisco AIR-LAP1131AG-E-K9 is not connecting with WLC4402 Cont

hi how can i do hard reset the AP? when we press the power button and hold it for 9 seconds then it is showing same conf.

VIP Purple
730
Views
0
Helpful
15
Replies