Cisco Aironet 1131ag - single SSID w/ multiple APs
I've configured 9 Cisco 1131ag Aironets and spread them across three floors(3 per floor). Each Aironet has a designated drop in the ceiling to provide wired access. My question is how do you create an ESS with only one SSID broadcasting? I currently have 9 'ssid name' broadcasting throughout the building.
All AP's are configured with non-overlapping channels. When I perform a site survey I can see each AP broadcasting on a different channel, as they should be.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...