03-14-2014 03:54 AM - edited 07-05-2021 12:25 AM
Hello all,
I have the following challange.
I deployed Cisco vWLC 7.5.102.0 and joined two AP Cisco 2602E which I successfully converted from AP to LAP. Both APs joined vWLC, enabled and show "operational status" REG. On vWLC I enabled broadcast SSID, checked radio 802.11a/b/g/n (enabled) and other things.
But I do not see any SSID (radio signal).
I tried different devices to find SSID (iPhone, Samsung Android phone, Laptop HP (InSSIDer application)).
It looks very strange for me because previousely when I deployed WLC-2500, once I join AP and enabled Radio - I was able to see SSID.
Will be glad to your ideas and ready to provide logs and screenshots.
Solved! Go to Solution.
03-14-2014 04:46 AM
Few things...
If you still have issues, then post the following:
show ap summary
show wlan <wlan id>
03-14-2014 04:46 AM
Few things...
If you still have issues, then post the following:
show ap summary
show wlan <wlan id>
03-16-2014 07:50 PM
Hi Scott Fella,
The problem was with FlexConnect. I changed mode and wireless appeared.
Thank you very much for your help!
05-04-2014 05:21 AM
04-05-2017 05:49 AM
Hi Scott,
Thanks for your help, it works for me ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: