Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco AP LED Status

Hello,

I would like to know if someone can tell me what means the LED status?

When it is blinkink, or OFF?

Rightnow, i have the LED OFF, bur the SSID is working, the broadcast is working...

What does it mean?

Tx,

B.

4 REPLIES
Hall of Fame Super Silver

Re: Cisco AP LED Status

You can enable and disable the LED on an access point if you want. Here is a link and most likely why your AP works but is in a disabled state. I'm assuming it's a lightweight AP

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010000001.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Cisco AP LED Status

For autonomous, the command is led display off or led display dim.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Cisco AP LED Status

Hi ,

Please refer the following doc. for more information.

https://supportforums.cisco.com/docs/DOC-5377

Let us know if you are looking for anyting in particular ( any AP model)

Regards
Victor V

*****Help out other by using the rating system and marking answered questions as *****Answered"*****

Regards Victor V *****Help out other by using the rating system and marking answered questions as *****Answered"*****
New Member

Cisco AP LED Status

Hi,

What is the model of the AP

Is it a Standalone AP or LWAP.

You can refer to the following link for the LED status:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1200/installation/guide/1200-TD-Book-Wrapper/120h_7.html

Check table 7-1

It is for 1200 series AP.

Please let me know the exact model of your AP.

Thanks and regards,

Manas Pratap Singh

320
Views
0
Helpful
4
Replies