Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco AP

Hello,

please help and suggest me for my requirement of AP in my  Office  any  AIRONET Series.

1.Concurrent users 50-60.

2.Use mac address filter

Thanks,

Saroj

Everyone's tags (2)
8 REPLIES
Hall of Fame Super Silver

Re: Cisco AP

Any of Cisco's autonomous AP's can do Mac filters. The baseline for number of users per AP is 20-25. This however depends on your applications running on your wireless. Video or Voice you will have less. HTML and email you can have more.

I would go with an internal antenna AP though like the AP1142.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Cisco AP

Here is a link on Mac filtering

http://www.cisco.com/web/techdoc/wireless/access_points/online_help/eag/123-04.JA/1100/h_ap_howto_5.html

http://www.cisco.com/en/US/docs/wireless/access_point/12.2_11_JA/configuration/guide/s11auth.html#wp1034875

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Cisco AP

What is the number of MAC will it support to add on the AP 1142.

Hall of Fame Super Silver

Re: Cisco AP

Here you go... It depends if you configure it from the CLI or the web GUI.

Note Using the CLI, you can configure up to 2,048 MAC addresses for filtering. Using the web-browser interface, however, you can configure only up to 43 MAC addresses for filtering.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Cisco AP

i have cisco AP 4410N  which support 20  MAC to add through the brouser. can we add one MAC on the AP through CLI .

IF yes plesae suggest the Command.

Community Member

Cisco AP

my question is can we add more MAC on cisco 4410n AP ?

Hall of Fame Super Silver

Re: Cisco AP

I don't know about those AP's.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Cisco AP

I don't think that has a CLI. Those look like one of the Linksys product line. If you need more that the limited 43, you need to get at least a AP1142. That is an 802.11n acess point also. Your going to be limited in those non enterprise AP's.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
351
Views
0
Helpful
8
Replies
CreatePlease to create content